Building Integrity · Site Pass
Hillview Residence
Site induction
Hillview Residence
14 Hillview Crescent, Torquay VIC 3228 · Building Integrity
- Takes about 3 minutes on your phone
- Have your White Card (or Vic Red Card) ready
- One induction covers you on this site for 12 months
- Been on a Building Integrity site before? Your details carry over
- Just visiting or dropping off? Shorter form — no card needed
This is a demonstration site — not a real project. Go through it and see exactly what a tradie sees at our gate. Nothing you enter here is used on a real job.
You must complete this induction before entering the work area. See Stuart if you have any trouble.
Step 1 of 6
Your details
You’re on site as
No card or SWMS needed — just your details, the site rules and a signature. Stay with your host and inside the visitor areas.
If you’ve been inducted on one of our sites before, this finds your details
Step 2 of 6
Construction induction card
Step 3 of 6
A few questions
Your trade
First time on this site?
Will you do any of this today? tap all that apply — or None of these
That’s high-risk construction work — your trade’s SWMS must be approved and signed before it starts. You’ll sign on in a moment.
Any medical conditions or allergies first aiders should know about?
Fit for work today — not affected by drugs, alcohol or fatigue?
See Stuart before starting any work.
Do you have the PPE for your tasks today? hi-vis, steel caps, eye and ear protection where posted
Step 4 of 6
Site rules & emergency info
- Sign in every day you are on site — first visit is this induction, after that tell the supervisor
- Site hours 7:00am–5:00pm Mon–Fri, 8:00am–1:00pm Sat
- Report every incident, near miss and hazard to the supervisor the same day
- No work outside your SWMS — if the work changes, come and see us first
- Hard hat, hi-vis and safety boots at all times; eye and hearing protection as the work needs it
- Both neighbours are living in — no radios, keep the shared driveway clear
- Amenities and the first aid kit are in the site shed
- Keep your work area clear and clean down daily — bins are provided, no burning off
In an emergency
- Dial
- 000 — then call Stuart
- Assembly point
- Front verge, opposite the site shed
- First aid
- Site shed
- Nearest hospital
- University Hospital Geelong — 20 min
- Site contact
- Stuart · 0413 078 093
Site Safety Planv2
Open the Site Safety PlanStep 5 of 6
Sign onto your SWMS
These are the Safe Work Method Statements covering work on this site.
Working at Heights — Roof Framing & Roof CoverApproved v2
Open and read the SWMSDemolition & Strip-Out — Existing DwellingApproved v1
Open and read the SWMSTemporary Propping to Existing StructureApproved v1
Open and read the SWMSOn or Near Live Electrical — Switchboard & Rough-InAwaiting approval
Crane lifts / rigging — site-wideAwaiting approval
If your work changes and isn’t covered by an approved SWMS, stop and see Stuart.
Step 6 of 6
Sign to finish
I declare the information I’ve given is true, I’ve read and will comply with the site rules and the SWMS I signed onto, and I’ll report all hazards, incidents and near misses to the site supervisor.
Sign here with your finger
✓
You’re inducted
Show this screen if Stuart asks.
- Name
- —
- Company
- —
- Site
- Hillview Residence
- Inducted
- —
- Valid to
- —
- Record
- —
Your induction is saved and on the site register. Have a safe one.
✕
STOP — do not enter the work area
Your details are saved, but you are NOT cleared to start work.
Why:
See management first
- See
- Stuart
- Call
- 0413 078 093
- Record
- —
Once Stuart sorts this out you’ll be cleared on the register — you won’t need to redo the whole induction.